Skip to main content

Course Outline

Skip audio player

Optional Sighting-In Techniques

Sighting-in technique

Use bore or collimator sighting-in initially to line up the rifle on the paper target. However, these techniques alone are not sufficient to sight-in a rifle. You must make final adjustments by firing the rifle with the same ammunition you plan to use in the field.

  • Bore sighting-in with bolt-action rifles: Remove the bolt, brace the firearm on sandbags, and look directly through the bore. Correct the rifle’s position until you see the bull’s-eye in the center of the bore. Adjust the sights to give you a good sight picture.
  • Collimator sighting-in for rifles without bolt actions: A collimator slips into the muzzle end of the barrel and allows you to adjust the sights, much like bore sighting-in.
  • Unit 3 of 8
  • Topic 2 of 4
  • Page 5 of 13
Back to the Study Guide Index